โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Rnode firmware for Nullhop Meshtoad V3? โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by nyla ยท 28d ago ยท 326949caa2f584e4
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ nyla #1 โ
โ 326949caa2f584e4 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 28d ago
Hello, I was wondering if Rnode firmware exists for the Nullhop Meshtoad V3, so that can
be used with reticulum instead of just meshtastic and meshcore, or if there is a way to
use it with reticulum as I'm not sure if Rnode firmware would be required to do so.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ batrat #2 โ
โ 500e6ab103644d28 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 26d ago
Disclaimer: I am new to this. But yes you need Rnode firmware. And unless the board is
nRF52840 or ESP32 based there is currently no support. I could not find good info with a
glance but I think the board is based on something else. Someone correct me if I'm wrong.
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Nickie #3 โ
โ c28ea15c1b83aaba โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 22d ago
nyla wrote:
> Hello, I was wondering if Rnode firmware exists for the Nullhop Meshtoad V3, so that
can be used with reticulum instead of just meshtastic and meshcore, or if there is a way
to use it with reticulum as I'm not sure if Rnode firmware would be required to do
so.
If you're willing to test it out, it should be pretty trivial to add RNode support to it.
I don't have the device but I can help out with making it support Rnode. Feel free to
message me at bafe8eceade55551fa1a17a6c0dcfd77
โ 0 โ 0 โค 0
โ INFO โ Identify to this node to post. How?
bottom